3 x Silos manufactured by Ellgard Equipment

Discharge method - sluice valve

1.57 mtr dia approx

7.2 mtr high - floor to top approx

Each silo has a 25 tonne capacity approx

Last used on semolina

2 no silo's made in year 1992

1 no made silo in year 1998

Complete with 2 no blower's, 1 no air dryer, 1 no heat exchanger.

DCE filters units on the top were manufactured in year 2000

Please contact us for further details

Single Drum Frigoscandia Spiral Mechanism 1992 - SOLD

Spiral mechanism with 610mm wide belt

Frigoscandia spiral mechanism with control panel. This machine is fully built for inspection. 

610mm BRAND NEW Stainless Steel belt with a mesh overlay

19 tiers x 150mm tier pitch. Single up drum.

North - South configuration

This machine can be refurbished or modified if required.

Price Reduced for Quick Sale!!

Excellent Value.

Please contact us for further details - SOLD

Complete Ball Point Pen Production Line

1. All the Machinery / Plant was purchased new from suppliers in Germany, Hong Kong and Taiwan

2. The machinery / plant is presently in running condition and has only been used for 9000 hrs. Even the original Spare Parts supplied along with machines have not been used.

3. Buyers can visit to inspect the machinery / plant in production and shipment can be arranged immediately on finalizing the deal. Location: Pakistan

4. A brand new machinery / plant from the same machinery suppliers as this will cost more then US$325,000/-

5. The complete machinery / plant can be easily installed in a building of 30x70ft = 2100sq feet and requires 36 Kws electric supply

6. The complete machinery / plant fit into 1 x 40ft container and brought into production within 15 days.

7. Monthly CAPACITY: 2,100,000 Ball Point Pens/3 Shifts/25days

8. Any type of plastic ball point pen can be made on this plant/machinery by using different moulds. (Existing Owner can assist buyer in this matter)

LIST OF PLANT AND MACHINERY WITH ORIGIN AND CAPACITY

1. LONGITUDINAL ASSEMBLY MACHINE / REFILL ASSEMBLY MACHINE / STAMPING MACHINE MODEL: BFA-1000 (GERMANY)
The machine is made / adjusted to manufacture, both refills and direct filled ball point pens. The machine has the following stations

2. PLASTIC EXTRUDER MACHINE-A (GERMAN MODEL)

3. PLASTIC EXTRUDER MACHINE-B (GERMAN MODEL)

4. PLASTIC INJECTION MOLDING MACHINE (TAIWAN)

5. MOLD OF CAP (TAIWAN), 16-cavity
6. MOLD OF CAP (HONG KONG), 16-cavity, interchange/removable cavities
7. MOLD OF CONE (HONG KONG), 24-cavity, interchange/removable cavities
8. MOLD OF PLUG (HONG KONG), 24-cavity, interchange/removable cavities
9. PLASTIC CRUSHER (TAIWAN)
10. PLASTIC MIXER (TAIWAN)
11. CENTRIFUGAL SEPARATION MACHINE (TAIWAN)
12. ROLL ON HOT STAMPING / TRANSFER FOIL MACHINE (HONG KONG)

The above Machinery can also be used for making Dexterous Tubes, Garden Pipes, Plastic Table ware, Household Items. Etc.

Please contact us for further details.

Complete Packaging Line for Candy/Sweets

YEAR 2007 - Only 6 months old

Comes complete with the following:

Hopper with 20Kilo capacity

Enclosed Swan Neck Bucket Conveyor -

Manufactured by 'Martini'

10 Head Multi-Head Weigher - (Similar to an Ishida)

Manufaftured by High Dream - Model AC-6B

Weight Ranges: 10 - 3000g

Max No. of doses: 70/min

Bagger - Euro Junior Model - with Markem Smart Date 2 Coder and Forming Set.

Bagger Manufactured by

FOSHAN CHUANGBAO PACKING MACHINE CB-320

Bag Sizes: Width 50mm - 150mm, Length 80mm - 200mm

Speed: 5 - 60 Bags/min

Includes Outfeed conveyor

This has an output to date of approx. 250,000 Bags since new.

Company selling due to restructure

Excellent opportunity

Condition - As New

Please contact us for further details

Ulma Florida Flow Wrapper

Year 2004

Entry Level Flow wrapper

The FLORIDA suits a wide range of applications, and it is the ideal machine for a multitude of applications with small and medium size production requirements.

TECHNICAL SPECIFICATIONS

• Cantilever construction which facilitates easy access for cleaning.
• Left to Right operating direction.
• Rotary cross sealing jaws.
• 3 Pairs of rollers for longitudinal film pulling and sealing.
• Self centring reel holder with a brake system.
• Infeed conveyor 2 m / 6 1/2' long.
• Adjustable film folding box.
• Machine parameter settings (bag length, pusher position) via the touch screen control.
• Touch screen setting of machine parameters, visible operational status and error messages.

This has been fully maintained by Ulma Service Engineers with full service history and manuals available.

This has only been used in production since it was bought new for about 3months, so is in excellent condition.

Was comfortably running at 100 packs per min for 2 months.

Please contact us for further details

Gainsborough GV2 K1 Vertical Form Fill & Seal Machine - SOLD

Comes with G Webb  - Digifill Auger for powder products.

Year 2002

With Gas Flushing

This has previously been used for dosing and packing Single shot coffee sachets/bags

Sizes: 50, 60 & 70gm doses.

Has had very little use, so in very good condition

Excellent Value for age and set-up

Please contact us for further details 

Sorry - no photos available at present.

SOLD

2 x Newman Cappers - Model 3 CT

Last running/tested in 2003 - Since then used as spare machines.

Previously used in Cosmetic Factory.

Please contact us for further details

Multipond 14 Head Multihead Weigher

Year 2003

Available immediately

Please call for further details

Soco Box Sealer T-400

Top Sealing Only
415v 10amps 250watts
Purchased New in 1998

Price NOW only £450.00

Please call for further details

Used Stainless Steel Pipe TIG Weld

Comprising: 8 x Machine Lines + Straightening + Polishing Lines

Now Shut Down

    * Line Speed :    5 ~ 7 Meter/ Minute

    * Built              :    Korean Maker Seo-Moon Eng

1) 63.5 ~ 125 mm Dia Pipe Mill

         * Thickness        :   0.9 ~ 4.0 mm thickness  

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :   46 PCS

            - Side Stand           :   1 Set

            - Forming Stand     :   7 Set

            - Side Roll Stand    :   6 Set

   (3) Welding Part              :   Inverter TIG 500 A

   (4) Cooling Part

   (5) Cutter

   (6) Conveyor

2) 50.8 ~ 76.3mm Dia  Pipe Mill

   : Now 63.5mm Dia Pipe Roll Produce 

         * Thickness        :   0.5 ~ 2.5 mm thickness 

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :   46 PCS

            - Side Stand           :   1 Set  : 610 x 110 x 360mm

            - Forming Stand     :   7 Set

            - Side Roll Stand    :   6 Set : 610 x 110 x 360mm

   (3) Welding Part              :   Inverter TIG 500 A

   (4) Cooling Part

   (5) Grinding Part             :   2 Stand Type , 5 HP

   (6) Cutter

   (7) Conveyor

   (8) Straightening Machine : 1700 x 600 x 1530mm

          6 PCS Roll Type , 5 HP

3) 25.4 ~ 50.8mm Dia Pipe Mill

    : Now 50.8mm Dia Pipe Roll Produce 

         * Thickness        :   0.5 ~ 2.5 mm thickness 

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :   46 PCS

            - Side Stand           :   1 Set  : 610 x 110 x 360mm

            - Forming Stand     :   7 Set

            - Side Roll Stand    :   6 Set : 610 x 110 x 360mm

   (3) Welding Part              :   Inverter TIG 500 A

   (4) Cooling Part

   (5) Grinding Part             :   2 Stand Type , 5 HP

   (6) Cutter

   (7) Conveyor

   (8) Straightening Machine : 1640 x 600 x 1530mm

          6 PCS Roll Type , 5 HP

   (9) Auto Polishing Line ( 5 Stage )

           : 3200 x 960 x 1280mm,  7.5 HP

4) 25.4 ~ 50.8mm Dia Pipe Mill

    : Now 38.1mm Dia Pipe Roll Produce 

         * Thickness        :   0.5 ~ 2.5 mm thickness 

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :   46 PCS

            - Side Stand           :   1 Set  : 610 x 110 x 360mm

            - Forming Stand     :   7 Set

            - Side Roll Stand    :   6 Set : 610 x 110 x 360mm

   (3) Welding Part              :   Inverter TIG 500 A

   (4) Cooling Part

   (5) Grinding Part             :   2 Stand Type , 5 HP

   (6) Cutter

   (7) Conveyor

   (8) Straightening Machine : 1640 x 600 x 1530mm

          6 PCS Roll Type , 5 HP

   (9) Auto Polishing Line ( 5 Stage )

           : 3200 x 960 x 1280mm,  7.5 HP

5) 25.4 ~ 50.8mm Dia Pipe Mill

    : Now 31.8mm Dia Pipe Roll Produce 

         * Thickness        :   0.5 ~ 2.5 mm thickness 

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :   46 PCS

            - Side Stand           :   1 Set  : 610 x 110 x 360mm

            - Forming Stand     :   7 Set

            - Side Roll Stand    :   6 Set : 610 x 110 x 360mm

   (3) Welding Part              :   Inverter TIG 500 A

   (4) Cooling Part

   (5) Grinding Part             :   2 Stand Type , 5 HP

   (6) Cutter

   (7) Conveyor

6) 12.7 ~ 25.4mm Dia Pipe Mill

    : Now 19.1mm Dia Pipe Roll Produce 

         * Thickness        :   0.5 ~ 2.0 mm thickness 

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :    46 PCS

            - Side Stand           :    1 Set  : 610 x 110 x 360mm

            - Forming Stand     :    7 Set

            - Side Roll Stand    :    6 Set : 610 x 110 x 360mm

   (3) Welding Part              : Inverter TIG 500 A

   (4) Cooling Part

   (5) Grinding Part             : 2 Stand Type , 5 HP

   (6) Cutter

   (7) Conveyor

7) 25.4 ~ 31.8mm Dia Pipe Mill

    : Now 25.4mm Dia Pipe Roll Produce 

         * Thickness        :   0.5 ~ 2.0 mm thickness 

   (1) Uncoiler              :   1set Single Arm Type

   (2) Forming Part

            - Roll                        :   46 PCS

            - Side Stand           :   1 Set  : 610 x 110 x 360mm

            - Forming Stand     :   7 Set

            - Side Roll Stand    :   6 Set : 610 x 110 x 360mm

   (3) Welding Part              :    Inverter TIG 500 A

   (4) Cooling Part

   (5) Grinding Part             : 2 Stand Type , 5 HP

   (6) Cutter

   (7) Conveyor

   (8) Straightening Machine : 1200 x 600 x 1400mm

          6 PCS Roll Type , 5 HP

   (9) Auto Polishing Line ( 5 Stage )

           : 2360 x 960 x 1280mm,  7.5 HP

8) Square & Rectangular Pipe Mill

   (1) Round pipe Capa    :    20mm ~ 50mm Dia

   (2) Dimension    :   1910mm x 845 x 700mm

   (3) Stand Bed    :   880 X 150 X 155MM

          Stand           :   240 X 150 X 830MM

            Roll             :   60 x 190mm x 8 set

                                   30 x 100mm  8 set

   (4) Reducer        :   10 HP, Control Box

Please contact us for price and viewing arrangements

SIG RM KB KT 4 Lane Tea Bagging Machine

Tea Bag Size:   65 x 75mm
Speed            :   1200/min

With Cartoner.

Came out of production 2 years ago in working order and has been stored in a container since.

We understand this will require some attention prior to going back into production.

Please call for full details

1 x Delver automatic chocolate tempering machine, year 1984, capacity p to approx 350kg per hour, with interlinking jacketed pipework and shut off valves above depositing hopper

Up to 12 sets Cabrellon polycarbonate moulds (used and in variable condition) including moulds for 8gm book moulded eggs, filled pralines and solid tablets.

Several pallets each loaded with plaques.

1 x Dominici CL600 plaque cleaner, year 1975. 

2 x Sapal PRLP egg foiling machines with one shared automatic bowl feeder, set up to wrap the 8gm moulded eggs at speeds approx 85 per minute per machine. With PEC foil registration.